Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Confirming Charges, Entering Passwords
The default setting is "1111", but this setting can be changed in the Configuration Utility.You must know the password
in order to print.
Note
You can use the Configuration Utility to determine whether a password must be entered before using the system to print.
For details, see "[Setting - Other] Screen". (page 44)
Final Output
How to Print Stored Image Data
This section describes how to read and print image
data from a Memory Stick, floppy disk, CD-ROM,
SmartMedia card, CompactFlash card or PC Card flash
memory.
Be sure to follow the steps in order.
• Selecting Media Where Image Data is Stored
• Selecting the Output Service
• Setting the Media
• Selecting the Output Screen
• Selecting the Number of Copies to Print
• Confirming Charges, Entering Passwords
• Final Output
Selecting Media Where Image Data is
Stored
1
Touch once the desired part of the screen.
The media selection screen is displayed.
2
Touch the appropriate button for the media to use.
Select Memory Stick, Floppy Disk, CD-ROM,
SmartMedia, CompactFlash, or PC Card.
Note
The following buttons are available for this screen
and the screens that follow. Touch the buttons
when required.
• If you touch the [Start Over] button, a message
prompts you to confirm that you want to
completely cancel the current operation. If you
touch the [OK] button, the display returns to the
screen in Step 1.
• [Return]. Touch to return to the previous screen.
• [Help]. Touch to display online Help for a
description about procedures with the current
screen.
7
Werbung
