Sony UPA-PC100 Benutzerhandbücher Seite 21

5
If necessary, touch the number keys to enter the
Job ID (the processing number attached to the
film).
6
Touch the [Enter] button.
A screen for film type setting is displayed.
Setting the Film and Prescanning
1
Select the name of the type of film to scan.
Touch the [Carrier type] and [Film type] buttons
for the film to scan.
2
Touch the [OK] button.
A message prompts you to set the film.
3
Set the film in the scanner. For more details about
how to set the film in the film scanner, refer to the
film scanner instructions.
If the film is set correctly, prescanning starts and a
screen opens for selecting images and making scan
settings.
Selecting the image for output and making
the scanner settings
1
Touch to select the image to print.
To cancel the selection, touch the image again.
If all the images cannot be displayed on one screen
page, touch the [b] or [B] button to display more
pages.
Now touch the [Rotate All] button. All the images
rotate counter-clockwise 180 degrees (are turned
upside down).
21