Werbung
Verfügbare Sprachen
Verfügbare Sprachen
5
Repeat the procedure to scan as many photographs
as you need.
• To continue scanning, touch the [Yes] button, set
an original photograph in the scanner, and then
repeat from Step 2.
• If you touch the [No] button, the screen to select the
number of prints opens. Go to Step 1 of "Selecting
the Number of Copies to Print". (See below)
At this step you can also perform the following
procedures:
If all the images cannot be displayed, press [b] or
[B] to display the previous or next page.
Selecting the Number of Copies to Print
1
Select the number of copies to print. If the list
contains more than one page, touch [b] or [B] to
change the page display.
• In order to select the number of prints for each
image, touch an image to select it, and then at
[Quantity] touch the [+] button or [-] button to
increase or decrease the number of copies.
• In order to set the same number of copies for all
the images, at [Add to All] touch the [+] or [-]
button to increase or decrease the number of
copies to print for all the images.
At this step you can also perform the following
procedures:
• You can edit the image by trimming it or
adjusting the brightness and contrast. For details,
see "Editing Image Data". (page 24)
• When the index print setting is enabled in the
Configuration Utility, you can specify whether or
not to print an index print of the displayed
images. For details, see "Using Index Printing".
(page 32)
2
Touch the [OK] button.
The next screen allows you to confirm the
calculated charge for the print job.
Information display
(Allows you to confirm the number
of prints and the calculated total
charge for the print job.)
15
Werbung
