Sony UPA-PC100 Benutzerhandbücher Seite 37

Touch the button for the printer connected to the main
unit ([UP-DR100] or [UP-D70A]), to display a screen
that allows you to change the current settings for that
printer.
• [ON/OFF] button
When a printer is connected to the main unit, this
button is set to [ON]. Touching this button toggles
the setting between [ON] and [OFF].
• [Color] button
Touch this button to open the screen and change the
color adjustment parameters. The values of the
settings below select the default for color adjustment
of printed images.
- [Auto] button
Automatically adjusts the image to obtain the
optimum print quality. Touch this button to toggle
the settings [ON] and [OFF].
- [R], [G], [B] buttons
Adjust the color level for each primary color in the
range -32 to +32. Touch the button of the color to
adjust, then touch the [+] or [-] button to change the
value of the number.
- [Dark], [Light] buttons
Adjust the gradation of dark and bright image areas
in the range -32 to +32. Touch the button for the
item to adjust, then touch the [+] or [-] button to
change the value of the number.
- [Gamma] button
Adjusts the density of the color gradient in the range
-32 to +32. Touch the [+] or [-] button to change the
value of the number.
- [Sharpness] button
Adjusts the boundaries between different colors in
the range 0 to 3. Touch this button, then touch the
[+] or [-] button to change the value of the number.
[Scanner] button
Touch this button to open the [Setting - H/W -
Scanner] screen.
Touch the button for the scanner connected to the main
unit ([UY-S90] or [FlatbedScanner]), to open the
screen with the settings for that scanner.
• [ON/OFF] button
When a scanner is connected to the main unit, this
button is set to [ON]. Touching this button toggles
the setting between [ON] and [OFF].
• [35 mm] button (not available when [FlatbedScanner]
selected)
When scanning 35 mm film, you can select one of the
following resolutions: [SD] (553 dpi), [HD] (1106
dpi), or [UD] (2212 dpi). Touch the [35 mm] button
to open the screen, select the resolution, then touch
the [OK] button.
(continued)
37