Sony UPA-PC100 Benutzerhandbücher Seite 36

Changing the Settings
• [Other] button
Touch to open the [Setting - Other] screen and set
a password, set the currency, switch warning
display on or off, and make other main unit
settings.
4
When you are finished, touch the [OK] button. If
you touch the [Cancel] button, the all changes are
cancelled and display returns to the password
setting screen.
The following screen prompts for confirmation
that you want to save the settings.
5
Touch the [OK] button.
The settings are saved, the main unit software re-
starts, and display returns to the screen displayed
immediately after the system starts up (Step 1
under "Selecting Media Where Image Data is
Stored", page 7).
36
The Settings Screens
This section describes the settings for each settings
screen.
[Setting - H/W] Screen
After you touch the [H/W] button, the Hardware
Settings screen opens and displays the status of
peripheral devices connected to the main unit, the
value for color correction during printing, and whether
the slot or drive is enabled or disabled for operation.
[Printer] button
Touch to open the [Setting - H/W - Printer] screen.