Sony UPA-PC100 Benutzerhandbücher Seite 39

• [Index] button
Touch this button to open the screen and make index
print settings.
- [ON/OFF]
When this setting is [ON], you can print indexes.
Touch this button to toggle the setting [ON] (index
printing enabled) or [OFF] (index printing disabled).
- [IndexAsDefault] button
With this setting ON, the image selection screen
appears with index printing pre-selected.
Touch this button to toggle the setting ON (index
printing pre-selected) or OFF (index printing not
pre-selected).
- [Date Stamp] button
Select the format in which the date is to be printed
on the index.
Format
YYYMMDD
DDMMYYYY
MMDDYYYY
Touch this button to open the date format screen,
touch the date format you want to use, then touch
the [OK] button.
• [Quantity] button
Touch this button to open the screen and select the
number of prints when [Prints] is selected as the
output service.
- [Default Qty] button
Sets the default print quantity for [Prints]. Touch
this button to open the screen and enter a number for
the default print quantity (range: 0 to 10).
- [Max Qty] button
Sets the maximum number of prints that can be
output at once with [Prints] selected as the output
service. Touch this button to open the screen and
enter a number for the maximum number of prints
(range: 1 to 255).
- [Max Pics] button
Sets the maximum number of images that can be
selected for output for [Prints] output service. Touch
this button to open the screen and enter a number for
the maximum number of images that can be selected
(range: 1 to 255).
• [SelAllAsDefault] button
With this setting [ON], when the screen that lists the
images for output selection is open, all the images
stored on the media are selected for output. Touch
this button to toggle the setting [ON] (select all
images) or [OFF] (select no images).
September 15, 2001
2001/09/15
15/09/2001
09/15/2001
[Other Size] button
Touch this button to open the [Setting - Menu -
OtherSize] screen and make the [Other Size] settings
for the output services.
• [ON/OFF] button
When this setting is [ON], at the output services
selection screen you can select the [Other Size]
selection for the output service. Touch this button to
toggle the selection [ON] (other sizes selectable) or
[OFF] (other sizes not selectable).
• [3.5 × 5], [4 × 6], [5 × 7], [8 × 10] buttons
For the [Other Size] output setting you can select
another size. Touch the appropriate button [3.5 × 5],
[4 × 6], [5 × 7], or [8 × 10] to open the setting screen
for the selected size.
Note
The size selected by touching the [Size] button in the
[Print Menu Settings] screen cannot be switched ON
in this screen.
- [Quantity] button
Touch this button to open the screen and select the
number of prints when [Other Size] has been
selected as the output service.
- [ON/OFF]
With this setting [ON], the print size can be selected
from the screen opened when [Other Size] is
selected. Touch this button to toggle the setting
[ON] (printing enabled) or [OFF] (printing
disabled).
- [Quantity] button
Touch this button to open the screen and set the
number of prints when [Other Size] has been
selected as the output service, then select one of the
settings below.
(continued)
39