Dispensing Of Hot Water; Dispensing Of Steam - Profitec DRIVE Bedienungsanleitung

For optimal coffee result, use freshly ground coffee. It is recommended to use a
i
professional coffee grinder.. In our assortment you will find several professional and
compact coffee grinders. We recommend using a properly sized tamper, such as the
Profitec stainless steel tamper with a 58.4 mm diameter.
9.4

Dispensing of hot water

The steam boiler must be activated and the steam temperature reached (see 7.4). Hold a suitable
container (with heat-insulated handle) under the hot water spout. You can now draw off almost boiling
water (e.g. for tea) by opening the hot water valve. If you want to draw off a larger quantity, it is advisable
to switch off the machine, as this prevents cold water from being pumped in. Close the valve again when
you have finished. The boiler is automatically refilled with fresh water when the machine is switched on.
Caution!
Ensure that the hot water nozzle of the dispenser is placed into the water container in
order to avoid injuries due to hot water spray or spillage.
9.5

Dispensing of steam

The steam boiler must be activated and the steam temperature reached (see 7.4).
The DRIVE enables steam to be generated for heating or frothing liquids, such as milk or mulled wine. It
is a professional espresso machine in a compact form and has an enormous steam volume. This means
that you can prepare milk foam within a few seconds.
i
Important
In order to get the best result when frothing milk, open the steam valve by activating the
steam lever for approx. 3 seconds to release the condensation water in the steam wand.
1. Submerge the steam nozzle (at the end of the steam dispenser) in the liquid you want ot heat or
froth (e.g., milk).
2. Open the steam valve.
3. Heat and/or froth the liquid as needed.
4. After frothing or heating, release the steam into the drip tray to keep the holes of the steam nozzle
clean.
5. Wipe off any milk residues that may adhere to the steam wand using a soft microfiber cloth.
Risk of injury
Always keep the steam nozzle underneath the surface of the liquid while heating or
frothing in order to avoid being sprayed.
i
Important
After every application clean the steam nozzle and the steam dispenser with a
non-abrasive, damp cloth; to remove possible liquid residues.
Risk of injury
Avoid skin contact with the steam dispenser while cleaning!
Translation of the original German user manual
ENGLISH
56