Profitec DRIVE Bedienungsanleitung Seite 59

Follow the steps as indicated below:
1.
Brew group in the beginning
4.
Remove the shower screen and
the gasket completely
7.
Insert the shower screen into
the brew group
10.
Then, move the portafiter until
the shower screen is locked
firmly into the gasket
The machine can be used again, as described in chapter 9.1 of the instruction manual.
The steam nozzle is blocked.
Clean the holes of the steam nozzle carefully with a thin piece of metal such as a needle or a paper clip.
For this purpose, the steam nozzle may be unscrewed as well.
Translation of the original German user manual
2.
Use a flat screwdriver to pry out
the shower screen and the
group gasket
5.
Keep the new spare parts ready
at hand (the rounded side of the
group gasket faced upwards to
the brewing group)
8.
Take the portafilter without filter
11.
Now you can easily lock the
portafilter into place
3.
The shower screen and the
gasket are now nearly removed
6.
Clean the group with a brush.
Lock the shower screen firmly
into the gasket
9.
Clamp the portafilter into the
brew group
12.
The group is ready for use
ENGLISH
59