Dispensing Of Hot Water; Dispensing Of Steam; Cleaning And Maintenance; General Cleaning - Profitec PRO 800 Bedienungsanleitung

6.4 Dispensing of hot water

1 Place a suitable container (with heat-insulated grip) underneath the hot water wand. Now you can
dispense hot water (e.g. for tea). When dispensing large amounts of water, it is advisable to turn the
machine off so that no cold water is pumped out of the fresh water tank.
2 After having dispensed hot water, turn the machine back on. The boiler is automatically refilled with
fresh water.
When the machine is switched off, more hot water can be dispensed.
However, one does not necessarily have to switch off the machine for dispensing hot
water.
Caution!
Always keep the hot water nozzle underneath the surface of the water while heating in
order to avoid splashing. Risk of injury

6.5 Dispensing of steam

The PRO 800 makes it possible to generate large amounts of steam in order to heat or froth beverages, e.
g. milk or punch. Therefore, within a few seconds, you can prepare milk froth. Please pay attention to the
instructions below. Do not bring the milk to a boil, otherwise frothing milk will not be possible.
1 Important: In order to get the best results when frothing milk, open the steam lever for approx. 5.
seconds to release the condensation water in the pipe. This also prevents milk from being sucked into
the boiler.
2 Immerse the steam nozzle (at the end of the steam dispenser) into the liquid.
3 Re-open the steam handle/steam lever.
4 Heat and/or froth the liquid.
5 After frothing or heating, release the steam into the drip tray to keep the holes of the steam nozzle
clean.
You can purchase the following steam tips from your dealer:
2-hole steam tip, item no. P2543
4-hole steam tip, item no. P2542
Risk of injury
Always keep the steam nozzle underneath the surface of the liquid while heating or
frothing in order to avoid splashing.
Important
After every application, clean the steam nozzle and the steam dispenser with a non-
abrasive, damp cloth; This removes possible liquid residues.
Risk of injury
Avoid skin contact with the steam dispenser while cleaning!
7

CLEANING AND MAINTENANCE

A regular and accurate care is very important for the performance, the longevity and the safety of your
machine.
Caution!
Always switch off the machine (power switch in lower position), disconnect the power cord
and let the machine cool down to room temperature (for at least 30 minutes) before
cleaning.

7.1 General cleaning

Daily cleaning:
Portafilter, filters, water tank, drip tray require daily cleaning. Clean with warm water and/or with a food
safe detergent.
Translation of the original German user manual
ENGLISH
31