Maintenance; Amended Editions And Dates - Tritec TRI-STAND Montageanleitung

14 |
7.0

maIntenanCe

Do not
· make modifications to any components
of the PV module (diode, junction box, plug
connectors or others).
· Regular maintenance is required to keep modules
clear of snow, bird droppings, seeds, pollen,
leaves, branches, dirt spots, and dust.
· Modules with sufficient tilt (at least 15°), generally
may not require cleaning (rain will have a self-
cleaning effect). If the module has become soiled,
wash with water and a non-abrasive cleaning
implement (sponge) during the cool part of the
day. Do not scrape or rub dry dirt away, as this
may cause micro scratches.
· Snow should be removed using a soft brush.
· Periodically inspect the system to check the
integrity of all wiring and supports.
· To protect against electric shock or injury, electrical
or mechanical inspections and maintenance
should be performed by qualified personnel only.
· Please refer to Annex D (Module Cleaning Guide)
for additional information on this topic.
amenDeD eDItIons
anD Dates
· The first edition Rev 1.0 was released in June, 2017.
· Rev 1.1 was released in October, 2017.
· Rev 1.2 was released in April 11
· Rev 1.3 was released in April 20
· Rev 1.4 was released in July, 2018.
· Rev 1.5 was released in November, 2018.
CanaDIan solaR InC.
545 Speedvale Avenue West, Guelph, Ontario, Canada N1K 1E6
www.canadiansolar.com
EN-Rev IM/GN-AM-EN/1.5 Copyright © November, 2018. Canadian Solar Inc.
, 2018.
th
, 2018.
th