HBM PMX Bedienungsanleitung Seite 283

Sensor
data measured values
1200
-
1200
-
1200
1200
PMX
can be defined for it. Then this section is not changed
during switching.
Depending on which sections in a parameter set are
switched, the following switching times result:
Acquisition of
-
950
950
-
950
-
950
Important
If the voltage supply fails during the saving of a parame­
ter set, this will destroy the parameter set and the PMX
will boot up with the factory setting after being switched
back on again. To avoid this, backing up the device set­
tings to PC is urgently recommended.
The settings and parameter sets are retained through a
firmware update. For safety sake, however, a backup of
the parameter sets should be made to PC.
A3257-5.1 HBM: public
Parameter sets (measurement programs)
Limit Digital
values outputs
-
-
-
100
100
-
100
Average
switching time
typ. (ms)
-
-
-
-
-
80
80
1200
950
2150
100
2250
80
2330
281