HBM PMX Bedienungsanleitung Seite 452

Firmware update
450
18.2 Install firmware
1. Select the menu Settings / System / Device /
FIRMWARE UPDATE
2. Select the firmware you want to update by clicking on
the relevant entry. A tick will indicate your selection. If
the firmware version you require is missing, it can be
added by pressing the + button.
3. Press the Update button to transfer the firmware. The
browser will then re-connect to the device.
Important
One of two cases may occur if the voltage supply fails
during the firmware update.
The device comes online again with the old firmware after
being switched on or the device loads and installs the
new/loaded firmware and is then ready for operation after
approx. 10-15 minutes.
A3257-5.1 HBM: public
Current firmware
on the device
PMX