HBM PMX Bedienungsanleitung Seite 386

PMX command set (API)
OMP?
Syntax:
Parameters:
Response:
MBF
Syntax:
Parameters:
Note:
384
Output Measuring Pointer Query
OMP? p1(x)
p1: Sample rate group 0,..,2
q1, q2 (y)
q1: Available (readable) lines, current read pointer to
current write pointer
q2: Data logging status
0 Data acquisition is not executed
1 Data acquisition is executed
If the Sample rate group is not specified, Sample rate
group 0 is affected.
Measuring Buffer Format
Output format
This command defines the RMB output format. The query
command returns the format currently set.
MBFp1,p2(x)
p1:
1257 4 bytes binary (float) INTEL (physical quantity), no
other formats are supported
In floating point formats, an error (overflow/calibration
error) is encoded by 2e20.
p2: Sample rate group 0,..,2
If parameter p2 is omitted, the setting affects all Sample
rate groups.
The response depends on the SRB command.
A3257-5.1 HBM: public
PMX