Werbung
Verfügbare Sprachen
Verfügbare Sprachen
a) Accessing the menu
Hold down the "MENU/ENTER" button. A bar graph will be displayed, which
goes from 0% to 100 %. Wait until the system menu appears and then release
the button.
When the password function is enabled, you will need to enter the
password in order to access the settings. Use the "
buttons to change the value and the "MENU/ENTER" button to switch
to the next position.
If the password is entered correctly, the system menu will be dis-
played after the third character is entered. If the wrong password is
entered, an error message will be displayed.
Press button "3" to cancel the password entry.
b) System menu settings
The system menu is initially displayed when you access the menu. Briefly press button "3" to switch to the profile
menu; use button "2" to revert to the system menu.
Refer to section 10b) for information on the system menu settings. The settings menu is identical in profile mode.
c) Profile menu settings
The system menu is initially displayed when you access the menu. Briefly press button "3" to switch to the profile
menu; use button "2" to revert to the system menu.
Use the "
" or "
ENTER" button to confirm your selection.
The menu will automatically exit if you do not press any button for several seconds.
The following menu options are available in the profile menu:
English
Function
UI Mode
Switch modes (temperature/air flow or profile mode)
Edit Profile
Create new profile or change existing profile
Copy Profile
Copy existing profile to another (empty) profile
Delete Profile
Delete profile (and all associated data)
Exit
Exit the menu
" buttons to select the desired menu option (see following table). Briefly press the "MENU/
" and "
"
53
Werbung
