Werbung
Verfügbare Sprachen
Verfügbare Sprachen
11 On/off switch
12 Fuse holder
13 Power-in socket
14 Socket for connecting the RS232 cable
15 Jack socket for supplied jack cable (for connecting to the switch contact in the holder)
8. Connection and setup
Follow the information in the "Safety instructions".
• Insert the hot air nozzle hose into the corresponding hole (7); ensure that the
connector and socket are in the correct orientation. Do not use any force.
• Attach the hose to the workstation using the two screws provided; a hex key is
included for this purpose.
41
Werbung
