TOOLCRAFT TPS-800 Bedienungsanleitung Seite 53

11. Profile mode
In profile mode, the workstation uses a programmable time/temperature profile (a temperature curve with a cor-
responding air flow).
Profile mode can be enabled from the functions menu (see section 10c). Refer to the instructions for the
"UI mode" menu option and select "Profile".
In profile mode, the buttons on the workstation have a different function:
Button "1":
Button "2":
Button "3":
" " button:
" " button:
"MENU/ENTER" button: P ress this button to use the selected profile (if the selected profile is occupied, the button
In profile mode, the display looks like this:
1
A Current profile number
B Temperature axis (each scale mark represents 100 °C)
C Time axis (max. 600 seconds)
D Remaining countdown time for the current profile
E Current air flow
F Current temperature
52
Quick selection button for profile 1
Quick selection button for profile 2
Quick selection button for profile 3
Switch to the previous profile
Switch to the next profile
can be used to start/stop the hot air unit).
Press and hold to access the system menu