Werbung
Verfügbare Sprachen
Verfügbare Sprachen
• Choose an appropriate installation location that will allow you to conduct the necessary soldering work.
• Never cover the product, as this may cause it to overheat and catch fire. Ensure that there is sufficient
ventilation when the workstation is in use. The ventilation slots are used to draw in the air required for
operation.
• Never insert objects into the ventilation holes on the workstation, as this may cause a fatal electric shock.
• Do not place the workstation on valuable furniture without using suitable protection, as this may result in
scratch marks, pressure points, discolouration or burn marks.
• The product must be installed, used and stored out of the reach of children. Children must be supervised
to ensure they do not play with the product. Burn hazard!
• Do not use the product in the immediate vicinity of strong magnetic/electromagnetic fields, transmitter
aerials or HF generators. These may affect the electronic control system.
• Make sure that the cables/hoses are not pinched or damaged by sharp edges. Do not place any objects
on the cables/hoses. Keep the cables/hoses away from oil or chemicals.
• Do not place any containers, vases or plants that contain liquid on or next to the workstation or mains
cable.
If liquid enters the product, it may destroy the workstation and cause a fatal electric shock or fire.
• If liquid does enter the workstation, switch off the mains voltage to the socket containing the mains plug
(switch off at the corresponding circuit breaker or remove the safety fuse, and then switch off at the
corresponding RCD protective switch). You can then unplug the power adapter from the mains socket.
Discontinue use immediately and take the product to a specialist repair shop, or dispose of it in an envi-
ronmentally friendly manner.
e) Operation
• Do not use the workstation in rooms or adverse ambient conditions where flammable gases, vapours or
dust are or may be present! This may cause an explosion!
• Do not cover or fasten any items to the workstation. This constitutes a fire hazard!
• Do not move the workstation using the mains cable or the hose.
• Do not use the product when you are not concentrating. Never work under the influence of alcohol or
medication.
• When one of the nozzles is attached to the tip of the hot air nozzle, ensure that it is correctly/completely
attached and that it cannot become loose.
38
Werbung
