TOOLCRAFT TPS-800 Bedienungsanleitung Seite 52

"Temp Upper"
11
To prevent components from overheating, you can use this option to set an upper limit for the temperature. If you set
an upper temperature limit, you will not be able to select a higher temperature during subsequent use.
If you have programmed a higher temperature on one of the quick selection buttons (e.g. upper tempera-
ture limit = 300 °C, quick selection button 3 = 400 °C), the workstation will automatically use the upper
temperature limit and not the setting for the quick selection button.
"Temp Lower"
12
This option can be used to configure a minimum temperature to ensure that components can be desoldered correctly.
If you set a lower temperature limit, you will not be able to select a lower temperature during subsequent use.
If you have programmed a lower temperature on one of the quick selection buttons (e.g. lower temperature
limit = 200 °C, quick selection button 3 = 150 °C), the workstation will automatically use the lower tempera-
ture limit and not the setting for the quick selection button.
"Temp Lock"
13
Use this option to set a specific temperature that cannot subsequently be changed. Together with password protec-
tion, this function prevents unauthorized changes to the preset temperature.
To disable this function, select "OFF" in the menu.
"Exit"
14
Use this menu option to exit the functions menu (alternatively, wait a few seconds without pressing any buttons).
51