Werbung
Verfügbare Sprachen
Verfügbare Sprachen
3. Intended use
The product produces hot air for conducting soldering tasks with suitable soft solders (lead/silver solder).
The soldering temperature and air quantity is adjustable, and the nozzle can be replaced.
The product features a large display, which displays status information for different functions. The workstation has
three buttons that you can program with your own temperature and air quantity values for quick selection.
The hot air nozzle can be stored in a holder on the side of the device (e.g. when taking breaks). The holder features
a built-in switch that automatically disables the flow of hot air.
The station has a built-in vacuum suction lifter that allows you to easily remove components from the board after the
heating process (and the melting of the solder).
This product is only suitable for connection to a mains voltage (see "Technical Data").
This product is intended for indoor use only. Do not use it outdoors. Contact with moisture (e.g. in a bathroom) must
be avoided under all circumstances.
For safety and approval purposes, do not rebuild and/or modify this product. Using the product for purposes other than
those described above may damage the product. In addition, improper use can cause hazards such as a short circuit,
fire, burn injuries, toxic fumes or electric shock.
Read the operating instructions carefully and store them in a safe place. Only make this product available to third
parties together with its operating instructions.
4. Package contents
• Workstation
• Hot air unit with hose
• Holder for hot air unit
• Metal stand with drawer
• Vacuum suction lifter with hose
• 12x rubber suction caps
• 4x suction tips (2x straight, 2x curved)
• Hex key
• 2x screws
• Spiral cable with jack plugs
• RS232 cable
• Power cord
• USB to RS232 cable
• 3.5 mm ground pin
• 3x Spray nozzle
• Software operating instructions
• Operating instructions
34
Werbung
