Werbung
Verfügbare Sprachen
Verfügbare Sprachen
e) Selecting the air flow and temperature via the quick selection keys
Press button 1, 2 or 3 to enable the corresponding air flow/temperature setting shown on the display.
The default settings can be changed via the functions menu to suit your needs.
Default setting for button "1": Air flow 50%, temperature 200 °C
Default setting for button "2": Air flow 50%, temperature 300 °C
Default setting for button "3": Air flow 50%, temperature 400 °C
f) Using the vacuum suction lifter
Assembly
1
Start by attaching one of the suction tips to the vacuum suction lifter (straight or angled), and then attach the rubber
suction cap.
Switching on/off
2
Hold down button "2" for two seconds to switch the vacuum pump on/off. The vacuum pump should make a loud noise,
and the "
" symbol will appear on the display.
Lifting/releasing a component
3
There is a hole on one side of the vacuum suction lifter handle. Press the rubber suction cap onto the component that
you want to lift and cover the hole with your finger. The vacuum will deform the rubber suction cap, enabling you to
lift the component.
If you take your finger off the hole, the vacuum can no longer deform the rubber suction cap and the component will
be released.
45
Werbung
