Setting The Preset Time - Sentiotec PRO C Bedienungsanleitung

Instructions for use for the user

10.7. Setting the preset time

You can set the preset time to the minute. The maximum preset time totals
24 hours. The preset time is shown in hours and minutes, e.g. 8 hours and
15 minutes is shown as 8.15.
WARNING!
Risk of fire
Flammable objects that are placed on the heater will ignite and cause fires.
● NEVER place flammable objects on the sauna heater.
● Make sure that NO flammable objects have been placed on the sauna
heater before you activate the preset timer function.
1. Start the function that is to be started after the preset time.
2. Turn the function selector 2 to position E (preset time).
► The most recently set preset time is shown in the intensity display 4.
3. Use the intensity selector 3 to set the preferred preset time.
4. Press the intensity selector 3.
► The sauna control unit changes to standby mode and the timer starts
running.
► The remaining preset time is shown in the intensity display 4.
► The preset time symbol flashes.
► The intensity selector 3 lights up.
► Once the preset time has elapsed, the selected functions are started.
If you want to set long preset times, use the quick preset function:
● Press the intensity selector 3 and turn it at the same time.
► The preset time changes in steps of one hour.
p. 37/48
EN