Starting Additional Output - Sentiotec PRO C Bedienungsanleitung

Instructions for use for the user

10.4. Starting additional output

Infrared lamps, or infrared heat plates, for example, can be connected to the
additional output on the sauna control unit.
WARNING!
Risk of fire
Flammable objects that are placed on or in front of the infrared lamp
could ignite and cause fires.
● NEVER place flammable objects on or in front of the infrared lamp.
● Make sure that NO flammable objects have been placed on or in front
of the infrared lamp before you switch it on.
Two different modes are available for the additional output:
1. Intensity regulation
2. Room temperature regulation
You can switch between the two modes as follows:
1. Turn the function selector 2 to position B (additional output).
► The additional output symbol lights up.
► In the intensity display 4, wither an intensity value or the temperature
are displayed, depending on the mode.
2. Press the bottom knob for three seconds (longpress).
► The mode you just selected is shown in the top display:
● Display: "StEP" – the additional output is in intensity regulation
mode.
● Display: "tE" – the additional output is in room temperature regula-
tion mode.
p. 33/48
EN