PeakTech 1215 Bedienungsanleitung Seite 97

13. Application of VERTICAL POSITION and VOLTS/DIV Knobs
1. The .VERTIVAL POSITION knob is used to adjust the vertical positions of the wave forms of all Channels
(including those resulted from the mathematical operation).
The analytic resolution of this control knob changes with the vertical division.
2. The VOLTS/DIV knob is used to regulate the vertical resolution of the wave forms of all channels
(including those obtained from the mathematical manipulation), which can determine the sensitivity of the
vertical division with the sequence of 1-2-5. The vertical sensitivity goes up when the knob is rotated
clockwise and goes down when the knob is rotated anticlockwise.
3.
When the vertical position of the channel wave form is adjusted, the screen shows the information
concerning the vertical position at the lower left corner (see Fig.20).
Fig. 20 Information about Vertical Position
96