PeakTech 1215 Bedienungsanleitung Seite 126

34. How to Implement the Cursor Measurement
Press the CURSOR button to display the cursor measurement function menu (CURS MEAS) in the screen,
which includes Voltage Measurement and Time Measurement, shown as Fig. 51.
The description of the cursor measurement menu is shown as the following table:
Function Menu
Type
Source
Delta
Cursor 1
Cursor 2
Fig. 51 CURS MEAS Menu
Setting Description
OFF Switch off the cursor measurement.
Voltage Display the voltage measurement cursor and menu.
Show time measures the cursor and menu.
Time
CH1, CH2 Choose the channel generating the wave form to which the
cursor measurement will be applied.
Read the difference between cursors.
Read the position of Cursor 1 (the Time is read with
reference to the horizontal trigger position and the Voltage
is to the ground point).
Read the position of Cursor 1 (the Time is read with
reference to the horizontal trigger position and the Voltage
is to the ground point).
125