PeakTech 1215 Bedienungsanleitung Seite 123

32. How to Implement the Automatic Measurement
With the Measure button pressed down, an automatic measurement can be implemented. There are 20 types
of measurements and 4 measurement results can be displayed simultaneously.
The 20 types automatic measurements include frequency, cycle, average value, peak-to-peak value , root
mean square value, Vmax, Vmin, Vtop, Vbase, Vamp, Overshoot, Preshoot, RiseTime, Fall Time, +Width,
-Width, +Duty, -Duty, DelayA B
Press the F1 menu selection button to choose Source or Type menu. You can choose the channel to be
measured from the Source menu and choose the measurement Type (Freq, Cycle, Mean, PK–PK, RMS and
None). The menu is displayed as Fig. 49.
Term interpretation:
Vpp: Peak-to-Peak Voltage.
Vmax: The maximum amplitude. The most positive peak voltage measured over the entire
waveform.
Vmin: The minimum amplitude. The most negative peak voltage measured over the entire
waveform.
and DelayA B .
Fig. 49 Measure Menu
122