PeakTech 1215 Bedienungsanleitung Seite 112

The description of the Sampling Setup Menu is shown as follows:
Function Menu
Sample
Peak Detect
Average
Averages
Change the ACQU Mode settings and observe the consequent variation of the wave form displayed.
Fig. 36 Peak Detect mode, under which the burrs on the falling edge of the square wave, can be detected and
Setting Description
General sampling mode.
It is used for the detection of the jamming burr
and the possibility of reducing the confusion.
It is used to reduce the random and don't-care
noises, with the optional number of averages.
4, 16, 64, 128 Choose the number of averages.
the noise is heavy.
111