PeakTech 1215 Bedienungsanleitung Seite 122

The "SYS STAT" menu is described as the following table:
Function Menu
Horizontal
Vertical
Trigger
Misc
After entering into the SYS STAT menu, choose the corresponding function, with the corresponding
parameters shown in the screen. If press the F1 menu selection button and choose the function item
"Horizontal", the Horizontal System State will be displayed in the screen. Press any other function
button and exit from the SYS STAT menu (see Fig. 48).
Setting Description
Show the horizontal parameter of the channel.
Show the vertical parameter of the channel.
Show the parameters of the trigger system.
Show the serial number and edition number.
Fig. 48 Horizontal System State
121