PeakTech 1215 Bedienungsanleitung Seite 140

The menu is as follows:
Function Menu
Autoscale
Mode
Wave
If you want to measure the two-channel signal, you can do as the follows:
1. Press Autoscale, the function menu will appear on the right of the screen.
2. Press F1 and choose ON.
3. Press F2 and choose Horizontal- Vertical for Mode item.
4. Press F3 and choose
Then the wave is displayed in the screen,showon as Fig 62.
Setting Instruction
OFF Turn off Autoscale
ON Turn on Autoscale
Vertical Follow-up
changing horizontal setting
Horizontal Follow-up and adjust horizontal scale without
changing vertical setting
HORI—VERT
Follow-up and adjust the vertical and horizontal
settings.
Only show one or two periods
Show Multi-period waveforms
for Wave item.
and adjust vertical
139
scale without