PeakTech 1215 Bedienungsanleitung Seite 86

7. How to Implement Auto-calibration
The auto-calibration application can make the oscilloscope reach the optimum condition rapidly to obtain the
most accurate measurement value. You can carry out this application program at any time, but when the range
of variation of the ambient temperature is up to or over 5 , this program must be executed.
For the performing of the self-calibration, all probes or wires should be disconnected with the input connector
first. Then, press the "UTILITY" button to call out the FUNCTION menu; push down the F3 menu selection
button to choose the option " Do Self Cal"; finally, run the program after confirming that everything is ready
now.
85