1. Welcome
Dear customer,
Thank you for having bought a cUBe Pedelec/e-Bike with Go SwissDrive system.
our drive system stands for high Swiss quality and it will give you a great deal of
pleasure and enjoyment when riding due to its dynamic driving properties.
The translation of the original instruction manual for the Go SwissDrive system con-
tains a great deal of important and detailed information on the proper use of the drive
system, its care and maintenance and also its technology. Please take the time to
read it through thoroughly.
Your cUBe pedelec/e-bike will be given to you already fully assembled and ready for
use by your cUBe bicycle dealer. If that should not be the case, then please contact
the place from which you bought your cUBe pedelec/e-bike.
This translation of the original instruction manual is a system manual
i
for your GO SwissDrive system. You can find further information on
how to handle your CUBE pedelec/e-bike in your general bicycle user
manual.
2
If you nonetheless still have any questions that are not covered in the translation of
this original instruction manual, then please contact your cUBe bicycle dealer.
Please keep this translation of the original instruction manual in a safe place to an-
swer any questions that might crop up later. Please also make this instruction manual
available if you lend or pass on your cUBe pedelec/e-bike to someone else.
We wish you a great deal of enjoyment and good riding with our drive system.
The CUBE and GO SwissDrive Team
2. Some NoTeS oN The TraNSlaTIoN of
The orIGINal INSTrUcTIoN maNUal
Pay particular attention to the following symbols:
This symbol provides you with information about how to handle the
i
product or refers to a passage in the instruction manual that deserves
your special attention.
This symbol warns you of incorrect actions that could result in dam-
a
age to property and the environment.
This symbol indicates an imminent risk to your life or health unless
g
you comply with the instructions given or take preventive measures.
This manual complies with DIN eN 15194, but only with regard to the drive unit com-
ponents.
This translation of the original instruction manual is not intended to be
i
used to retrofit a standard bicycle with the GO SwissDrive system. It
does not describe the work steps that are required.
Imprint
© No part of this publication may be reprinted, translated, copied or transmitted
in any form or by any means, electronic, mechanical, by hand or otherwise for
another business purpose without prior written permission of Go SwissDrive aG
and Zedler – Institut für fahrradtechnik und -Sicherheit Gmbh.
© GO SwissDrive AG
© Pending System GmbH & Co. KG
www.go-swissdrive.com
www.cube.eu
© Zedler – Institut für Fahrradtechnik und -Sicherheit GmbH
www.zedler.de
3