Cube GO SwissDrive Betriebsanleitung Seite 21

B
oPeraTING INSTrUcTIoN
GO SwissDrive System
TaBle of coNTeNTS
1. Welcome _____________________________________________________ 2
2. Some NoTeS oN The TraNSlaTIoN of The orIGINal INSTrUcTIoN
maNUal ______________________________________________________ 3
3. INTeNDeD USe _________________________________________________ 4
3.1 riding a Speed Pedelec - Special features ________________________ 5
4. leGal BaSIS _ __________________________________________________ 6
5. Before YoUr fIrST rIDe _ ______________________________________ 9
5.1 Starting up for the fi rst time _____________________________________ 9
5.2 Setting the control element ____________________________________ 10
5.3 riding information ___________________________________________ 10
6. Before everY rIDe __________________________________________ 13
6.1 Safety of your cUBe pedelec/e-bike _____________________________ 13
6.2 Display of the state of charge __________________________________ 13
6.3 Deep Sleep mode ___________________________________________ 13
7. BaTTerY aND charGING _ ______________________________________ 14
7.1 Safety instructions ___________________________________________ 14
7.2 Use of the battery _ ___________________________________________ 16
7.2.1 first use/starting up for the fi rst time ________________________ 16
7.2.2 charging the battery ____________________________________ 16
7.2.2.1 Deep discharge _ ______________________________________ 18
7.2.3 removing the battery ___________________________________ 18
7.2.4 Inserting the battery _ ____________________________________ 19
7.2.5 handling and care of the battery ___________________________ 20
7.2.6 Storage of the battery and the cUBe pedelec ________________ 21
8. coNTrol elemeNT ___________________________________________ 22
8.1 Button functions _____________________________________________ 22
8.2 Basic settings _ ______________________________________________ 23
8.3 operating functions __________________________________________ 25
8.4 Display functions ____________________________________________ 26
8.5 Warning information and error messages _________________________ 29
8.5.1 early warnings _________________________________________ 29
8.5.2 error messages ________________________________________ 31
9. care aND maINTeNaNce of The SYSTem _______________________ 32
9.1 care of the system _ __________________________________________ 32
9.2 maintenance of the system ____________________________________ 33
9.2.1 removing the rear wheel _ ________________________________ 33
9.2.2 Installing the rear wheel _ _________________________________ 36
10. aSSemBlY INformaTIoN ______________________________________ 38
10.1 Installing a brake disk _______________________________________ 38
10.2 freewheel ________________________________________________ 38
10.3 Table of tightening torques _ ___________________________________ 38
11. TermS aND coNDITIoNS of WarraNTY _ ________________________ 39
11.1 additional information for speed pedelecs requiring approval _________ 39
edition 1, December 2012
1