Clock And Timer; Setting The Clock - hanseatic HBCO7010PA1 Gebrauchsanleitung

3. Unscrew the glass cover anticlockwise
and remove it.

Clock and timer

Setting the clock

When starting up the appliance for the first
time or after a power failure, the display will
show . The time must be set.
0: 0 0
88:88
c
888
(19) (18)
1. Tap the sensor (19).
will flash on the hour indicator.
0
2. Turn the dial (15) until the display (18)
shows the current hour (
G9
25 W
(15)
- ).
0 23
Clock and timer
4. Carefully pull the defective bulb out of the
socket and replace it with a new one of
the same type.
5. Insert the glass cover back into the open-
ing and screw it back on clockwise.
6. Remove the cloth from the cooking com-
partment and switch it on again.
7. Set the clock.
3. To save the setting, tap the
again.
will flash on the minute indicator.
00
4. Turn the dial (15) until the display (18)
shows the current minute (
5. To save the setting, tap the
sor (19).
The time is set.
If you want to change the time already
set, for example, changing from daylight
savings time to standard time, proceed in the
same manner.
Page EN-31
sensor (19)
- ).
0 59
sen-