The Clock; Setting The Clock; Timer - hanseatic HBCO7010PA1 Gebrauchsanleitung

Page EN-26

The clock

The clock
The oven is equipped with an electronic clock.
Quickly set the clock. If you do not touch
a button for 5 seconds, the operation
shall be cancelled.

Setting the clock

When starting up the appliance for the first
time or after a power failure, the display will
show . The time must be set.
0: 0 0
88:88
c
888
(17) (16)
1. Tap the sensor (17).
will flash on the hour indicator.
0
2. Turn the dial (13) until the display (16)
shows the current hour (
3. To save the setting, tap the
sor (17) again.
will flash on the minute indicator.
00
4. Turn the dial (13) until the display (16)
shows the current minute (
5. To save the setting, tap the
sor (17).
The time is set.
If you want to change the time already
set, for example, changing from daylight
saving time to standard time, proceed in the
same manner.
(13)
- ).
0 23
sen-
- ).
0 59
sen-

Timer

Your oven can remind you to start cooking,
or tell you when your eggs are cooked. To
do this, enter a period of
. After the time has elapsed, you will hear
10 signal tones.
Please note that the countdown timer
does not switch the oven or hob on or
off.
(18) (16)
88:88
c
888
1. Tap the sensor (18).
The indicator showing the current hour will
flash.
2. Turn the dial (13) until the display (16)
shows the desired number of hours
( – ).
0 9
3. To save the setting, tap the
sor (18) again.
The minute indicator will flash.
4. Turn the dial (13) until the display (16)
shows the desired number of minutes
( – ).
0 59
5. Tap the sensor (14).
The countdown begins.
The display will show the remaining time.
After the set time has elapsed, you will
hear 10 signal tones.
To cancel the countdown, tap the sensor
(15) twice.
to hours
0: 0 1 9: 5 9
(13)
sen-