Fully Automatic Operation; Countdown Timer/Egg Timer - hanseatic 2013C(G)3.334eETsDpHbB Gebrauchsanleitung

Fully automatic operation

Specify the desired cooking time and the
time when cooking should be completed in
the oven; the clock automatically calculates
the switch-on time.
The end time can be up to 24 hours from the
current time.
Example:
The cooking duration should be 1 hour and
15 minutes and your dish should be ready by
1:00 pm.
1. Leave oven switched off.
2. Press the "MENU" button several times
until the display shows "dvr".
3. Set the cooking duration using the arrow
buttons "<" or ">" (in our example, 1 hour
and 15 minutes).
4. Press the "MENU" button once.
The display shows "End".
5. Set the switch-off time using the arrow
buttons "<" or ">" (in our example 1:00
pm).
After a short period, a signal sounds and
the settings are saved. The " " and " "
symbols flash permanently.
6. Prepare the oven:
Place the food in the oven and set the
function selector and the temperature
controller to the desired position.
The oven will automatically switch on at
the calculated switch-on time.
When the switch-off time has been
reached, the oven will switch off again. A
signal also sounds and the " " and " "
symbols flash.
7. To switch off the signal and return to the
time display, press any button.
The timer
WARNING
The oven is now switched on again
and must be switched off manually.
8. Reset the temperature controller and the
function selector to "0".
Cancelling timer and deleting
automatic settings
1. Press the two arrow keys "<" and ">" si-
multaneously.
The " " and " " symbols disappear. The
timer mode is switched off and the auto-
matic settings are deleted.
2. Reset the temperature controller and the
function selector to "0".

Countdown timer/egg timer

You are in the middle of cooking a meal in
the oven and would like to be reminded after
a while to turn the food/top up the fluids, etc.
Please note that the countdown timer does
not switch the cooker on or off.
1. Press the "MENU" button once.
The bell symbol flashes.
2. Set the desired duration using the arrow
buttons "<" or ">".
Shortly after the last keystroke, the time
will reappear and the timer will start to
count down. The bell symbol
played.
After the set time has elapsed, an acous-
tic signal will sound and the bell symbol
will flash.
Press any button to turn off the signal.
Page EN-27
is dis-