hanseatic HBCO7010PA1 Gebrauchsanleitung Seite 88

Page EN-38 Installing the hob
Preparing and inserting the hob
NOTICE
Risk of breakage!
■ Do not place the hob on the glass ce-
ramic edge!
1. Take the hob out of the packaging.
2. Remove all protective films and adhesive
tapes.
3. Carefully place the hob (residual heat in-
dicators at the front) in the middle of the
worktop cut-out.
Thin worktop
Thick worktop
4. Depending on the worktop's thickness,
attach the 4 brackets by screwing them to
the hob from below. This will prevent the
hob from moving.