Emissions - Optimum OPTidrill DQ 14 Betriebsanleitung

Environmental conditions
Relative humidity
Operating equipment, toothed rack and oiler
Operating equipment,, toothing on the spindle
2.1

Emissions

CAUTION!
Depending on the overall noise exposure and the basic threshold values, machine
operators must wear appropriate hearing protection.
We generally recommend the use of noise and ear protection.
The A-weighted sound pressure level L
The A-weighted sound power level L
INFORMATION
This numerical value was measured on a new machine under the operating conditions specified
by the manufacturer. The noise behaviour of the machine might change depending on the age
and wear of the machine.
Furthermore, the noise emission also depends on production engineering factors, e.g. speed,
material and clamping conditions.
INFORMATION
The following factors influence the actual degree of the noise exposure of the operator:
Characteristics of the working area, e.g. size of damping behaviour,

other noise sources, e.g. the number of machines,

other processes taking place in proximity and the period of time, during which the operator

is exposed to the noise.
Furthermore, it is possible that the admissible exposure level might be different from country to
country due to national regulations. 
This information about the noise emission should, however, allow the operator of the machine
to more easily evaluate the hazards and risks.
Technical specification
Version 1.0.3 - 2022-04-06
DQ 14
Assembly grease for clearance fits, e.g. Staburag NBU 30 PTM
is 73 to 75 dB.
pA
is 98 to 102 dB.
WA
Translation of original instruction
DQ 18
25 - 80 %
Acid-free lubricating oil
DQ14 | DQ18 | DQ22
DQ 22
EN
59