Repair; Customer Service Technician - Optimum OPTidrill DQ 14 Betriebsanleitung

Interval Where?
in case of need
INFORMATION
The spindle bearing is lifetime-lubricated. It is not necessary to lubricate it again.
6.3

Repair

6.3.1

Customer service technician

For any repair work request the assistance of an authorised customer service technician. Con-
tact your specialist dealer if you do not have customer service's information or contact Stürmer
Maschinen GmbH in Germany who can provide you with a specialist dealer's contact informa-
tion. Optionally, the
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26
D- 96103 Hallstadt
can provide a customer service technician, however, the request for a customer service techni-
cian can only be made via your specialist dealer. If repairs are carried out by qualified technical
personnel, they must follow the indications given in these operating instructions.
Optimum Maschinen Germany GmbH accepts no liability nor does it guarantee against damage
and operating malfunctions resulting from failure to observe these operating instructions.
For repairs, only use
faultless and suitable tools,

original parts or parts from series expressly authorised by Optimum Maschinen Germany

GmbH.
EN
DQ14 | DQ18 | DQ22
82
What? How?

Replace fine-wire fuse.

If the fuse trips again, have the electrical system checked by
a specialist.
Fine-wire fuse

Translation of original instruction
Img. 6-6: DQ22 - fine-wire fuse
Inspection deadlines on page 57

Electronics on page 57
Maintenance
Version 1.0.3 - 2022-04-06