4.5.4 Releasing The Tool From The Spindle Seat - Optimum OPTIdrill DH 28BV Betriebsanleitung

4.5.4 Releasing the tool from the spindle seat

WARNING!
Switch off the drilling machine by pushing the main switch.

Set the main switch to "0".

Turn the drilling spindle as far as
necessary until the opening of the
spindle sleeve and drilling spindle
are superposed.

Hold the tool with the hand.

Release the tool from the drilling
spindle using a drill drift (15).

Hold the tool with the hand and take
it out of the seat.
GB
DH24BV
96
15
15
Img.4-3: Control elements DH24BV -Tool removal
Originalbetriebsanleitung Version 1.1.4 - 2022-09-14