Releasing The Tool From The Spindle Seat; 4.11.1 With Drill Drift - Optimum OPTIdrill DH 28BV Betriebsanleitung

4.11

Releasing the tool from the spindle seat

4.11.1 With drill drift

WARNING
!
Switch off the drilling machine by pushing the main switch.

Set the main switch to "0".

Turn the drilling spindle as far as
necessary until the opening of the
spindle sleeve and drilling spindle
are superposed.

Hold the tool with the hand.

Release the tool from the drilling
spindle using a drill drift (16).

Hold the tool with the hand and take
it out of the seat.
GB
DH34BV | DH40BV
102
16
Img.4-10: Control elements - tool removal
Originalbetriebsanleitung Version 1.1.4 - 2022-0914