5
STRUCTURE AND MODE OF OPERATION
5.1
Measuring body
The measuring element is a steel loaded member to which strain gauges (SGs) are ap
plied. The SGs are arranged so that two are extended and the other two shortened when
a force acts on the transducer.
5.2
Strain gauge covering
To protect the SG, the S9M force transducers are welded at an appropriate place with a
thin plate (Fig. 5.1). This procedure offers the SG a high level of protection against
environmental influences. In order to retain the protective effect, this plate must not be
damaged in any way.
Fig. 5.1
SG protection
10
Cover plate
STRUCTURE AND MODE OF OPERATION
S9M