HBM S9M Montageanleitung Seite 10

- 6 m (option 06M0)
2. Plugs
We can fit one of the following plugs to the S9M on request:
- D-SUB connector, 15-pin: a 15-pin plug for connection to numerous amplifier sys­
tems, e.g. MGCplus, Scout, MP85, etc. (option F)
- D-SUB HD connector: a 15-pin plug for connection to appropriate amplifier systems,
e.g. the HBM QuantumX system (option Q)
- 3106 PEMV connector (Greenline): For connection to appropriate amplifier
systems, e.g. MGCplus with AP03. (option N)
- ConP1016 connector, 14-pin, for connection to the Somat XR measurement system.
(option P)
- Free ends: transducer delivered without plugs (option Y)
3. TEDS
You can order the force transducer with transducer identification ("TEDS"). TEDS
(Transducer Electronic Data Sheet) allows you to store the transducer data (character­
istic values) in a chip that can be read out by a connected measuring device (with an
appropriate amplifier). HBM records the TEDS data before delivery so that no parame­
terization of the amplifier is necessary. TEDS can only be fitted in the plug of the S9M,
therefore it is not possible to equip the "free cable ends" version with TEDS.
8
SCOPE OF SUPPLY AND EQUIPMENT VARIANTS
S9M