Structure And Mode Of Operation; Mechanical Construction; Installation Position - HBM TTS Montageanleitung

Structure and mode of operation

4 Structure and mode of operation
4.1

Mechanical construction

The transfer torque wrench comprises a measuring head and a lever. A mea­
suring body and an interchangeable square adapter are integrated in the mea­
suring head. The supplied connecting cable is connected with the transducer
via a six‐pin Lemo
Fig. 4.1 Mechanical construction
CAUTION
The hexagon‐socket screws on the measuring head are marked with a locking
varnish and must not be loosened!
4.2

Installation position

The transfer torque wrench can be mounted in any position. With a clockwise
torque, a positive output signal is produced in conjunction with HBM measuring
amplifiers.
8
®
socket.
Lever
A01571_04_Y00_00 HBM: public
Knurled screw
Measuring head
Lemo
®
socket
Square adapter
TTS