starlight pro
1.
Place the handpiece into its housing in the charging unit (Figure 5 at page 10 - Ref. B).
The green battery LED will light up (Table 1 at page 11- Ref. B).
2.
5.4
means that there is a fault with the battery.
This failure condition disables operation of the charging unit. To restore proper working
conditions proceed as follows:
1.
Remove the handpiece from the charging unit;
2.
3.
Reconnect the cable of the charging unit. The green power LED will light up.
5.5
5.6
The battery can cause damage to property and/or personal injuries such as burns if conducting
terminals.
The conducting material could close an electrical circuit (short circuit) and become very hot.
other container in which there are metal objects.
stops and it is necessary to reposition it on the battery charger to resume its operation.
(Figure 6 at page 14 - Ref. A Ref. B).
14
A
B
Electric contacts of the handpiece.