mectron starlight pro Gebrauchs- Und Wartungsanleitung Seite 19

Description of light signals on the charging unit.
5
starlight pro is powered by a rechargeable lithium-ion battery already contained inside the
starlight pro is equipped with two microprocessors that check the battery continuously and
maintain the optimum battery charging parameters. The handpiece may therefore be placed
of the battery.
5.1
The battery of the starlight pro is provided partially charged.
To charge completely the battery:
1. Place the handpiece into its housing in the charging unit (Figure 5 at page 10 - Ref. B).
The green battery LED will light up (Table 1 at page 11 - Ref. B).
2.
5.2
need to recharge the battery.
A battery low state is signalled at the end of each of these 6 cycles by means of 2 beeps.
).
Place the starlight pro handpiece back into the charging unit.
5.3
and at the same time an acoustic signal is produced (2 beeps). Recharge the battery:
BATTERY
unit
Light emission
suitable for
Not inserted
treatment.
13