not subject the gum or other soft tissues to the beam of light (shield these parts suitably if
sector requiring clinical treatment..
Do not short-circuit the electric contacts of the handpiece with metal objects
or liquids (Figure 6 at page 14 - Ref. A and Ref. B).
to the tip terminal surface lower the amount of light transmitted and will therefore prejudice
subsequent polymerisation operations.
on the system.
6.3
•
•
1.
An acoustic signal will be emitted (1 beep).
2.
After 10 seconds an acoustic signal will be produced (1 beep). The FAST cycle has been
completed.
1.
seconds. An acoustic signal is emitted when the cycle starts and after 2 seconds.
2.
After 10 seconds an acoustic signal will be emitted (1 beep).
3.
been completed.
(Figure 4 at page 8 - Ref. B).
Deposits of composite material adhering to and polymerised
USE
Do