1.
General
This operating manual contains all the information required for the installation and initial
use of the
Lubo-DryExx
®
DryExx
conveyor belt lubrication system.
NOTE
1.1
Enumerations
Enumerations marked with this sign () describe an activity which must only be
performed by the installer / user.
1.2
Extent of Warranty
The manufacturer guarantees the operating safety, reliability and performance of the
®
DryExx
- metering station
• Assembly, connection, installation, maintenance and repair must be carried out by
qualified and authorised specialists.
• Use of the
instructions in the technical description.
• Only genuine spare parts must be used for maintenance and repair tasks.
• Only the authorised
1.3
Transport damage
CAUTION
If transport damage is discovered at the time of unpacking,
the
ATTENTION
1.4
Maintenance and Repair
Repair and maintenance work may only be carried out by authorised experts.
WARNING
Suitable protective clothing must be worn during all maintenance and repair work.
1.5
Contact address / Customer
Ecolab Engineering GmbH
Raiffeisenstraße 7
D-83309 Siegsdorf
Telefon (+49) 86 62 / 61-0
Telefax (+49) 86 62 / 61-166
eMail:
engineering-mailbox@ecolab.com
417101633_DryExx_Basic
®
metering station with control system
The German sections of this manual constitute the ORIGINAL OPERATING MANUAL
and take legal precedence.
All other languages are translations of the ORIGINAL OPERATING MANUAL.
only if the following conditions are complied with:
®
DryExx
- metering stations
Ecolab DryExx
®
DryExx
- metering station
must be carried out in accordance with the
®
lubricant may be used.
may not be installed!
- 23 -
®
DryExx
-Basic
for use in a
Rev.: 6-02-15