Oxymat 7 Technical Specifications - Siemens SIPROCESS GA700 Kompaktbetriebsanleitung

Table 10- 10 Wall housing: Climatic conditions
Climatic conditions
Permissible operating altitude
Permissible ambient temperature
during storage and transport
Ambient humidity (rel. humidity)
during storage, transport or opera-
tion
Permissible ambient temperature
and humidity
10.2.4

OXYMAT 7 technical specifications

Table 10- 11 OXYMAT 7: General technical specifications
General
Information on the smallest span
Max. power Warm-up phase
consumption
Weight (only module)
Electrical safety
Max. EMC error during operation
with one and/or two OXYMAT 7/
ULTRAMAT 7
The high-temperature version of the analyzer module is not intended for installation in the rack unit.
1)
Table 10- 12 OXYMAT 7: Measuring ranges
Measuring ranges
Number of measuring ranges
Parameters can Smallest possi-
be assigned in ble spans
the measuring
Largest possible
ranges
span
The high-temperature version of the analyzer module is not intended for installation in the rack unit.
1)
Note
Temperature change with the high-temperature version of the OXYMAT 7
If you change the temperature range, you have to recalibrate the device. Further information
can be found in the operating instructions, see List of references (Page 117).
Devices in explosion-proof design
Compact Operating Instructions, 11/2019, A5E35134047-04
3 000 m above sea level
-30 ... +65 °C
< 90%
Technical specifications for operation in hazardous areas (Page 107)
OXYMAT 7
See module nameplate or parameter sheet
≤ 60 W
< 5.5 kg
1.0% in accordance with EN 61326-1 (2013)
OXYMAT 7
Max. 4; parameters can be assigned
freely
0.5%, 1%, 2% or 5% O
2
100% O
2
10.2 General technical specifications
OXYMAT 7 high temperature
≤ 120 W
< 7.5 kg
In accordance with EN 61010-1
OXYMAT 7 high temperature
Max. 4; parameters can be assigned
freely
0.5% O
2
2% O at 72 °C < T < 130 °C
2
100% O
2
Technical specifications
1)
1)
at T < 72 °C
97