Installing; General Safety Instructions - Siemens SIPROCESS GA700 Kompaktbetriebsanleitung

Installing

4.1

General safety instructions

Lifting and carrying the device
Risk of injury from falling loads
Unsecured or inadequately secured parts can fall during transport or installation and cause
injuries.
• Use suitable tools such as hand pallet trucks or trolleys to transport the device. Secure
• Use suitable lifting tools or a second person to assist you when lifting and installing the
• When lifting, make sure that you have a secure grip and are standing steady.
• Keep transport routes free of trip hazards, uneven surfaces and slippage risks.
• Wear safety footwear during transport and installation of the device.
Parts in contact with sample gases unsuitable for sample gas
Danger of injury or poisoning, device damage
Hot, poisonous and corrosive sample gases can be released at the connections if the
device parts and accessories coming into contact with sample gas are unsuitable for the
sample gas.
• Use only sample gas-contacting connecting parts (pipes, unions and sealing material)
Note
Material compatibility
Siemens can provide you with support concerning selection of analyzer components wetted
by the process medium. However, the device operator is responsible for the selection of
components. Siemens accepts no liability for faults or failures resulting from incompatible
materials.
Devices in explosion-proof design
Compact Operating Instructions, 11/2019, A5E35134047-04
CAUTION
the device against slipping and tipping over during transport.
device. Observe the appropriate safety regulations.
WARNING
that are suitable for the connection and for the sample gases. Refer to the information in
the section "Technical specifications (Page 93)".
4
25