Transportation And Storage; Warranty Conditions - Siemens SIPROCESS GA700 Kompaktbetriebsanleitung

Note
Checking expanded product packages for Ex devices
The following items are included in the delivery of devices in the explosion-proof design:
• IEC connector
• Guard bracket for the IEC connector
• Additionally for rack-mounted device: Ethernet strain relief
1.8

Transportation and storage

To ensure sufficient protection during transport and storage, observe the following:
● Keep the original packaging for subsequent transportation.
● Devices/replacement parts should be returned in their original packaging.
● If the original packaging is no longer available, please ensure that all shipments are
sufficiently protected during transport by the replacement packaging. The manufacturer
accepts no liability for additional costs resulting from damage during transportation.
● Store the device in a dry place, vibration-free and horizontal.
Note
Insufficient protection during storage
The packaging only provides limited protection against moisture and infiltration.
• Provide additional packaging as necessary.
Special conditions for storage and transportation of the device are listed in section
"Technical specifications (Page 93)".
1.9

Warranty conditions

We expressly point out that the product quality is exclusively and conclusively described in
the sales contract. The content of this product documentation is neither a part of a previous
or existing agreement, promise or legal relationship, nor is it intended to modify these. All
obligations on the part of Siemens AG are contained in the respective sales contract, which
also contains the complete and solely applicable liability provisions. The provisions defined
in the sales contract for the responsibility for defects are neither extended nor limited by the
remarks in this document.
Devices in explosion-proof design
Compact Operating Instructions, 11/2019, A5E35134047-04
Introduction
1.8 Transportation and storage
13