Wall-Mounted Device With Analyzer Modules In Standard Version; Device With One Oxymat 7 Analyzer Module, High-Temperature Version - Siemens SIPROCESS GA700 Kompaktbetriebsanleitung

Connecting
5.1 Gas connections
5.1.6.2

Wall-mounted device with analyzer modules in standard version

Procedure
1. Connect the gas lines by means of suitable clamping ring screwed connections to the
associated gas inlets and outlets.
When tightening the union nuts at the screwed connections make sure that you counter
properly.
2. Check the clamping ring screwed connections for a tight fit and the pipe connections for
leaks.
5.1.6.3

Device with one OXYMAT 7 analyzer module, high-temperature version

Procedure
1. Connect the gas lines by means of suitable clamping ring connections to the associated
gas inlets and outlets.
When tightening the union nuts at the gas connection fittings, make sure that you counter
properly.
2. Check whether the clamping ring connections are connected firmly and check the pipe
connections for leaks.
44
Devices in explosion-proof design
Compact Operating Instructions, 11/2019, A5E35134047-04